Now many enterprises are wholesale office furniture, because a lot of office furniture can be purchased at a low price, and the quality is also very good.


So what should we pay attention to when we sell furniture? Today, Xiaobian office furniture factory is going to tell you! Some enterprises adopt custom-made office furniture. It's actually a matter of choosing office furniture. While choosing office furniture, observe whether the wood is defective. Furniture should not have large scars or cracks or cracks in its main force-bearing parts, such as load-bearing bars near the ground between pillars and connecting pillars. Structures are firm, frames must not be loosened, mortise and material breakage are not allowed. The components of wood-based panels used in furniture should be edge-sealed, and many parts, leaking nails and penetrating nails should be installed in all kinds of accessories. All of these should be noted, generally observe these can understand how this office furniture operation? The management system is not sound and sound.


Then open the door and drawer of the office furniture cabinet, and observe whether the wood is dry, compact, white and delicate. If there are furniture made of particleboard, density board and primary forming board, open the cabinet door or drawer and smell to see if there is irritating odor. If there is a pungent odor, we must pay attention to whether formaldehyde exceeds the standard. It's recommended not to buy those with severe irritation.


另外,將手放在家具的表面,仔細檢查拋光面是否平滑,特別要避免臺腳等部位是否毛糙,顏料涂刷是否有條痕,角位的顏料是否涂得過厚,是否有裂痕或氣泡。看疤結也是鑒定純木的好方法:看好有疤痕的一面所在位置,再在另一面找是否有相應花紋。木紋和疤結。如一個柜門,外表看上去是一種花紋,那么相應著這個花紋變化的位置,在柜門的背面看相應的花紋,如果對應得很好則是純實木柜門。這些也是辨別家具的方法,當然在挑選家具的時候注意這些方法也就足夠了 本文由浙江辦公家具廠|定做高檔辦公家具公司|辦公家具批發采購|鋼木辦公桌椅—杭州范優奇家具制造有限公司網站(。

In addition, put your hands on the surface of furniture, carefully check whether the polishing surface is smooth, especially to avoid rough foot and other parts, whether there are any marks in the paint brushing, whether the corner paint is too thick, whether there are cracks or bubbles. Looking at scars is also a good way to identify pure wood: look at the location of the scarred side and find out if there are corresponding patterns on the other side. Wood grain and scar. If a cabinet door looks like a pattern, then corresponding to the changing position of the pattern, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is a pure wooden cabinet door. These are also ways to distinguish furniture. Of course, when choosing furniture, these methods will be enough. This article is made by Zhejiang office furniture factory, which is made up of high-end office furniture company, office furniture wholesale and purchase, and steel wood desk chair -- Hangzhou Fan Youqi Furniture Manufacturing Co., Ltd. website (


福建22选5中奖规律 网上买彩票恢复了吗 (★^O^★)MG黄金工厂怎么玩容易爆分 (★^O^★)MG水果大战爆分打法 甘肃快三- 新mg电子游戏网站 新时代娱乐平台 (★^O^★)MG大白鲸试玩网站 新疆18选7连线走势图 李大仙 (★^O^★)MG财富之轮登陆 (*^▽^*)MG超级船长的宝藏在线客服 (★^O^★)MG剑的秘密巨额大奖视频 广西快三走势图360 网赚平台是真的吗 六肖中特免费管家 浙江快乐彩走势图一定